Hantek DSO2C10 Oscilloscope, 100 Mhz 2 Channel- Promo 2 Probes
Original price was: ₹20,500.00.₹18,200.00Current price is: ₹18,200.00.
(including 18% GST)
Cost-effective economy oscilloscope, 100MHz Bandwidth, 1GSa/s, 8M memory depth; 14 kinds of trigger modes, standard with 5 kinds of serial protocol triggers and decodes; 32 kinds of auto measurements with statistics; 3-digit digital voltage meter 2 sets of DVM; Abundant SCPI remote command control. It is a useful commissioning instrument for various fields such as communication, aerospace, national defence, embedded systems, computers, research and education.
- 2 channels which are respectively controlled by independent knobs.
- 100 MHZ analog channel bandwidth
- Sampling rate up to 1 GSa/s
- 8M memory depth
- Vertical range 2mV/div ~ 10V/div
- Vertical resolution: 8bit
- Trigger: Edge, Pulse, Video, Slope, Overtime, Window, Pattern, Interval, Under Amp, UART, LIN, CAN, SPI, IIC
- BUS decode and protocol analysis: RS232/UART, I2C, SPI, CAN, LIN
- Can save multiple data formats, such as settings, waveforms, reference waveforms, CSV, pictures.
- 32 kinds of auto measurements with statistics, real-time statistics of maximum, minimum, standard deviation etc.
- 2 sets of digital voltmeters
- Support threshold testing, free measurements within the screen.
- Abundant SCPI remote command control
- USB Host/Device.
Model DSO2C10
Bandwidth 100MHz
Oscilloscope channels 2CH
Oscilloscope
Sample rate 1GSa/s (single channel) 500MSa/s (two channels)
Acquisition
Normal Sample data
Peak-to-peak value Display high frequency and random burr
Average Average waveform, times: 4, 8, 16, 32, 64, 128
High resolution Up to 12bit
Input
Input coupling DC, AC, GND
Input impedance 1MΩ±2% ‖20pF±3pF.
Probe attenuation factor 1X, 10X, 100X, 1000X
Voltage rating 300V CAT II
Maximum input voltage 300VRMS (10X)
Horizontal
Waveform interpolation (sin x)/x
Maximum record length Single channel maximum 8M
Two channels maximum 4M
Horizontal scale range 2ns/div~100s/div 1, 2, 5 step by step
Time base mode Y-T, X-Y, Roll
Zero offset ±0.5 div×minimum time base gear
Sample Rate and Delay Time Accuracy ±25ppm
Sample Rate and Delay Time Accuracy ±50ppm（at any interval greater than 1ms）
Vertical
Rising time in BNC position (typical) 3.5ns
Vertical resolution 8 bits resolution, each channel samples simultaneously
Vertical sensitivity 2mV/div to 10V/div
Offset range ≥ 200mV/div, ±1V;
＜200mV/div ±50V
Mathematical operation +, -, ×, ÷, FFT
FFT Window: Rectangle, Hanning, Hamming, Blackman, Bartlett, Flattop
Bandwidth Limit 20MHz
Bass response（-3db） In BNC position ≤ 10Hz
Vertical gain accuracy In ”normal’‘ or ”average” acquisition mode, the accuracy of 10V/div to 10mV/div is ±3%
In ”normal” or ”average” acquisition mode, the accuracy of 5mV/div to 2mV/div is ±4%
Related products
Mastech MS2001 – Digital AC Clamp Meter- 1000A AC
- Jaw Size: 42mm/1.7
- Tests AC/DC Voltage and Current, Resistance, Capacitance, Frequency and Duty Cycle
- Diode Check and Continuity Test
- Data Hold and Display Back Light
- Safety Rating: CE, CAT II 1000V, CAT III 600V RoHS
- DC Voltage 1000V
- AC Voltage 750V
- AC Current 20A/200A/1000A
- Includes the following- Operator's instruction manual,- Set of test leads,,- 9 volt battery
Reviews
There are no reviews yet.